Koolance CPU-200G Uživatelský manuál stáhnout pdf (Strana 1)

CPU-200 Cooler Installation Guide

v 2.00

CPU-200 Cooler Installation Guide

The most prominent liquid cooler is also the easiest

to install.

Apply thermal interface compound directly to the

CPU die. Do not add more than is necessary to cover

it with a very thin layer.

Remove the protective film from the bottom of

the CPU cooler.

Insert the temperature sensor into either

bottom groove on the CPU cooler.

Apply metal tape to keep the temperature

probe in place. Do not stick metal tape to the

the raised (polished) portion of the CPU cold

plate.

You can use a zip-tie to further secure the

temperature probe to the CPU tubing.

CAUTION: Be sure to attach the Koolance temperature probe to the

CPU cooler during installation. The safety features of your system

may not function properly without the correct placement of this probe.

1 2 3

Shrnutí obsahu

Strany 1

CPU-200 Cooler Installation Guidev 2.00CPU-200 Cooler Installation GuideThe most prominent liquid cooler is also the easiestto install.Apply thermal i

Strany 2 - & P-III socket 370

CPU-200 Cooler Installation Guidev 2.00There are 3 center receptacles on the CPU cooler. The tension screw must usethe receptacle that best-aligns it

Strany 3

CPU-200 Cooler Installation Guidev 2.00CAUTION: Installing the tension screw into the wrong coolerreceptacle can cause insufficient cooler contact, an

Komentáře k této Příručce

Žádné komentáře

Koolance CPU-200G Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Hardware Koolance CPU-200G. Koolance CPU-200G User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Koolance CPU-200G Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Hardware Koolance CPU-200G. Koolance CPU-200G User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Hardware Koolance CPU-200G